In the process of using optical sights, we sometimes find that the position of the center scale line in the scope lens is not in the center of the lens, and the left and right deviations occur. The scale line is not in the center, aiming The bounce point of the mirror is not in the place we reserved. What should I do?
Don't worry, we can adjust the impact point of the scope by adjusting the ballistic supplementary adjustment button in the scope.
The adjustment method is as follows:
The adjustment button located above the scope is the ballistic compensation adjustment button. Usually there is an arrow on it, marked with the letter'u', which means that when the knob is rotated in the direction of the arrow, the impact point will be adjusted upward in the vertical direction. u refers to the meaning of up; vice versa
The adjustment knob on the right is the wind deflection adjustment knob, usually with an arrow drawn on it, marked with the letter'L', which means to adjust the knob in the direction of the arrow, and the bounce point will be adjusted to the left in the horizontal direction. L refers to Left means to the left; vice versa.
How do I know if I have adjusted the impact point of the scope? We also need to calibrate the scope.
Target target, aim at the bullseye, and shoot in a group of 5 shots. For example, the impact points are scattered on the lower right of the bullseye. At this time, you can adjust the wind deflection knob in the horizontal direction first, and turn the knob along the L direction. The impact point will be left in the horizontal direction. Move sideways until it is adjusted to be basically directly below the bull's-eye; then adjust the distance compensation knob in the vertical direction, and follow the U direction knob to move the point of impact in the vertical direction gradually until it basically coincides with the bull's-eye...
It is necessary to explain that if the production process of the projectile is not up to standard, the impact point will be irregular. At this time, talking about the adjustment of the scope is basically a waste of effort. The precision of the toy itself is also directly related to the accuracy. The above-mentioned adjustment of the sight Is based on the relatively consistent ballistics
Through these methods, we can make the center scale line in the scope at the center of the lens, that is, the impact point of the scope is at the center of the lens.
