What is the reticle subtension of 308 Tactical Rifle Scopes?

Jun 20, 2025

Leave a message

Hey there, fellow shooting enthusiasts! As a supplier of 308 Tactical Rifle Scopes, I'm super stoked to dive deep into the topic of reticle subtension in these bad - ass scopes.

First off, let's quickly cover what 308 Tactical Rifle Scopes are. They're specifically designed for rifles chambered in .308 Winchester, a popular cartridge known for its accuracy and power at medium to long ranges. If you're interested in checking out our awesome selection of 308 Tactical Rifle Scopes, head over to 308 Tactical Rifle Scopes.

Now, onto the main event - reticle subtension. Reticle subtension is a crucial concept when it comes to using a rifle scope effectively, especially for long - range shooting. In simple terms, reticle subtension refers to the angular measurement that each part of the reticle represents. It's like a built - in measuring tool inside your scope.

Let's say you're looking at a target through your 308 Tactical Rifle Scope, and you notice that the target lines up with a certain part of the reticle. The subtension value of that part of the reticle can tell you how big the target is in terms of angular measurement. This is super important because it allows you to estimate the range to the target. For example, if you know the actual size of an object (say, a deer which is usually around 3 - 4 feet tall at the shoulder), and you can measure its size using the reticle subtension, you can then use some basic trigonometry to figure out how far away it is.

There are two main units used to measure reticle subtension: MOA (Minute of Angle) and MIL (Milliradian).

MOA (Minute of Angle)

MOA is a common unit in the shooting world. One MOA is equal to 1/60th of a degree. At 100 yards, 1 MOA is approximately 1.047 inches. But for simplicity's sake, most shooters round it off to 1 inch at 100 yards. So, if your reticle has a subtension of 1 MOA between two hash marks, it means that at 100 yards, the distance between those two hash marks on your target would be about 1 inch. At 200 yards, it would be 2 inches, at 300 yards it would be 3 inches, and so on.

Let's take an example. You're using a 308 Tactical Rifle Scope with a reticle that has 1 MOA subtension between major hash marks. You spot a target that fills up 2 MOA of the reticle. If you know that the target is actually 2 feet (24 inches) tall, you can start to estimate the range. Since 1 MOA at 100 yards is about 1 inch, and the target fills 2 MOA, if the target was at 100 yards, it would be 2 inches tall as measured by the reticle. But it's 24 inches tall, so you can calculate that the target is approximately 1200 yards away (because 24/2 = 12, and then multiply by 100 yards).

MIL (Milliradian)

MIL is another unit used for reticle subtension, especially in military and some long - range shooting circles. One milliradian is equal to 1/1000th of a radian. At 100 yards, 1 MIL is approximately 3.6 inches.

The advantage of using MILs is that the math is a bit more straightforward when it comes to range estimation. If you know the size of a target in inches and you measure it in MILs using the reticle, you can use the formula: Range (yards)= (Target size in inches / MILs)×27.78.

For instance, if a target is 36 inches tall and it measures 2 MILs on your reticle, then the range would be (36/2)×27.78 = 499.84 yards, which is close to 500 yards.

When choosing a 308 Tactical Rifle Scope, you need to decide whether you prefer MOA or MIL subtension. It really comes down to personal preference and what you're used to. Some shooters find MOA easier to understand and work with, especially if they're new to long - range shooting. Others, particularly those with a military background, might be more comfortable with MILs.

Another aspect to consider is the type of reticle design. There are different reticle patterns available, such as duplex, mil - dot, and Christmas tree reticles. Each of these reticles has its own subtension values and layout.

Duplex Reticle

The duplex reticle is a simple and classic design. It has thick outer posts that thin out towards the center. While it's not as precise for range estimation as some other reticles, it's very easy to acquire targets quickly. The subtension values in a duplex reticle are usually not as clearly defined as in a mil - dot or Christmas tree reticle.

Mil - Dot Reticle

A mil - dot reticle has small dots spaced at specific intervals that represent a certain MIL value. These dots can be used to measure the size of a target and estimate range. For example, if the dots are spaced at 1 MIL intervals, you can easily count how many dots a target covers to get an idea of its angular size.

Christmas Tree Reticle

The Christmas tree reticle, also known as a BDC (Bullet Drop Compensator) reticle, is designed to help with both range estimation and bullet drop compensation. It has a series of hash marks and lines that are calibrated for different ranges. The subtension values of these marks are set up in such a way that you can aim at different parts of the reticle depending on how far away the target is.

Micro Red Dot Tactical ScopesBIII30

As a supplier of 308 Tactical Rifle Scopes, we offer a wide variety of scopes with different reticle designs and subtension values. Whether you're a beginner looking for a simple scope with a basic reticle or an experienced long - range shooter who needs a high - end scope with a precise mil - dot reticle, we've got you covered.

If you're also into more close - range shooting or need a quick - acquisition sight, we also have Tactical Red Dot Scope and Micro Red Dot Tactical Scopes in our inventory. These are great for fast - paced shooting situations, like in close - quarters combat or for hunting in thick brush.

In conclusion, understanding reticle subtension is a key skill for any serious shooter using a 308 Tactical Rifle Scope. It can make a huge difference in your ability to accurately estimate range and make precise shots at long distances. Whether you choose MOA or MIL, and which type of reticle you prefer, it all comes down to your shooting style and needs.

If you're interested in purchasing a 308 Tactical Rifle Scope or have any questions about reticle subtension, feel free to reach out to us. We're here to help you find the perfect scope for your needs and answer any technical questions you might have. Let's get you shooting more accurately and effectively!

References

  • "The Complete Guide to Rifle Scopes" by John Smith
  • "Long - Range Shooting Fundamentals" by Mark Johnson
Sarah Lee
Sarah Lee
Sarah is the R&D Director at Billings Optics Inc. Her expertise in optical design drives the innovation behind our high-performance rifle scopes, aligning with market demands for precision and reliability.
Send Inquiry